A solvent-based acrylic concrete sealer designed to protect and enhance concrete surfaces. It improves surface durability, reduces dusting, and provides resistance against moisture and wear. Hard Coat also enhances the appearance of concrete with a clean, sealed finish suitable for interior and exterior applications.

Key Points

• Solvent-based acrylic concrete sealer
• Enhances surface durability and wear resistance
• Eliminates dusting and moisture ingress
• Provides a clean, sealed finish for interior and exterior use

Hyperstop is a high-performance hydrophilic waterstop that expands up to 250% in volume when exposed to moisture, creating a durable and pressure-resistant seal within concrete joints. It is designed to maintain sealing effectiveness under repeated wetting and drying cycles. Hyperstop is commonly used in underground construction, retaining structures, and water-exposed concrete joints.

Key Points

• High-performance Bentonite/Butyl Rubber hydrophilic waterstop
• Expands on contact with water and forms a pressure-seal
• Maintains sealing through wet/dry cycles
• Used in underground and water-exposed structures

‍

Technical data

• Operating Pressure variable to  40bar/580psi
  
• Operating Voltage  V/Hz/A          230/50/16
• Delivery Rate                               0.40L/Min variable
• Max Conveying Distance            80m
• Max Aggregate Size                    6mm
• Dimensions (LxWxH)                  145 x 50x 70cm
• Weight                                         85kg

Advantages

• For liquid and paste-like materials incl grout/mortar/micro concrete.
• Detachable plastic material hopper
• High delivery rate with interchangable Rotor/Stator Combinations
• Continuously variable speed control using potentiometer
• Simple operation and easy disassembly for cleaning

‍

Technical data

• Operating Pressure variable to  6.9bar/100psi
  
• Operating Voltage  V/Hz/A         230/50/16
• Delivery Rate                               0.8L/Min
• Max Conveying Distance            100m
• Max Aggregate Size                    9.5mm
• Dimensions (LxWxH)                  60x23x75cm
• Weight                                          28kg

Advantages of the M8

• Lightweight, small and handy
• For liquid and paste-like materials
• Extremely efficient peristaltic pump technology
• Simple operation
• Very fast cleaning and maintenance
• Continuously variable quantity control
• Suitable for dry running
• Detachable plastic material hopper
• Forward and reverse running

‍

Jointseal JS600 is a high-performance, two component, Aliphatic polyurea joint sealing compound. It is designed for sealing construction and expansion joints in concrete structures. Easy self-leveling installation, it provides strong adhesion, long-term flexibility, and excellent resistance to water ingress and environmental exposure. Extremely fast setting and trafficable , JS600 is suitable for civil, commercial, and infrastructure applications requiring durable joint sealing.

Key Points

• Two-component aliphatic polyurea joint sealant
• Designed for expansion and construction joints
• Fast curing and trafficable
• High flexibility and water resistance

‍

KLEEN KRETE is a unique liquid that has the ability to remove dry, hardened concrete from virtually any surface and will not harm aluminum, chrome, electrical systems, glass, paint, rubber and most other surfaces when used according to directions. This is a biodegradable product and eliminates the need for air hammering, sandblasting and scraping hardened concrete from equipment, forms and other items that may come in contact with concrete. It is packaged ready-to-use and only needs to be brushed or sprayed onto the dry concrete that needs to be removed. KLEEN KRETE is also an environmentally friendly way to etch and clean concrete floors in preparation for application of epoxy or simply to create a non-slip surface.


Environmentally Friendly
KLEEN KRETE is the eco-friendly alternative to conventional methods of removing hardened concrete and helps extend the life of your equipment by keeping it clean.

Easy To Use
KLEEN KRETE is packaged ready-to-use and is easy to spray or brush on.
*Dilute for use as a brick wash (see instructions).

Non-Hazardous
KLEEN KRETE is safer for your employees and the environment than conventional acids that are typically used to remove hardened concrete or etch concrete floors.

Reduces Equipment Damage and Labor Costs
By eliminating the need for air hammering, sand blasting and scraping, KLEEN KRETE reduces associated labor times and damage caused to buildings, equipment and vehicles.

Safe For Use On Most Surfaces
KLEEN KRETE will not damage chrome, paint, rubber and most other surfaces when used according to directions.

A crystalline waterproofing coating designed to waterproof and protect concrete structures against water penetration. It reacts with moisture and unhydrated cement particles to form insoluble crystals within the concrete pores. Krystol T1 is suitable for basements, tanks, tunnels, and below-ground concrete structures.

Key Points

• Crystalline waterproofing system
• Reacts with moisture to block concrete pores
• Provides internal waterproofing protection
• Suitable for below-ground and water-retaining structures

Description

Kuniseal is considered a low pressure hydrophilic waterstop that, when encased in a concrete cold joint, expands on contact with water to form a pressure seal. Kuniseal is shrouded in a water-soluble adhesive sleeve making adhesion to irregular surfaces quick and easy.

Key Points

• Bentonite-based hydrophilic waterstop
• Swells on contact with water to seal joints
• Self-adhesive for easy installation
• Suitable for below-ground and high-pressure applications

SPECIAL PROPERTIES

• Ready to use.
• Improve adhesion, flexibility and workability of cementitious plaster, render etc
• Can be used as a primer for concrete, (1 part latex: 3 parts water)
• Reduces shrinkage.
• Improves the adhesion of repair materials to brick or concrete.
• Increases the flexural and tensile strengths of mortars and concretes.
• Imparts flexibility to site batched repair materials and floors.
• Reduces the permeability and enhances durability.
• Will not break down or re-emulsify.
• Water based - mixing equipment and tools easily cleaned with water.
• Economic, non-toxic and safe to use.

‍

USES

• To give greater adhesion, workability and flexibility to all cementitious plaster, renders etc.
• To penetrate and consolidate brick and concrete substrates.
• To prime concrete and brick to increase bond strength of repair materials.
• To waterproof site batched renders, mortars and concrete.
• For site batched flooring materials, and repair materials for floors.
• To prevent frost attack to brick and concrete.
• For use as an adhesive with cement or cement mortar.
• For use in chemically aggressive situations, e.g. food factories, dairies and fertiliser stores.
• High strength or increased tensile strength applications.

‍

Technical data

• Operating Pressure variable to  25bar/350psi
  
• Operating Voltage  V/Hz/A          230/50/16
• Delivery Rate                              10L/Min variable
• Max Conveying Distance            35m
• Max Aggregate Size                    2mm
• Dimensions (LxWxH)                  75 x 34x 43cm
• Weight                                         33kg

Advantages

• For liquid and paste-like materials incl grout and fine plaster.
• Detachable plastic material hopper
• Continuously variable speed control using potentiometer
• Simple operation and easy disassambly for cleaning

‍

Mapefer 1K is a brush-applied anti-corrosion mortar for protecting exposed steel reinforcement during concrete repair.It is used after rust and loose concrete have been removed, helping protect the rebar before the repair mortar is placed. Mapefer 1K also supports adhesion between the steel, existing concrete, and repair mortar, making it a useful part of a proper concrete repair system.

Key Points

• Anti-corrosion coating for reinforcement steel
• Protects rebar after concrete breakout
• Supports bonding in repair systems
• Brush-applied cementitious protective layer

‍

Mapefill SP is a Super High high-flow, non-shrink cementitious grout designed for precision anchoring and void filling in structural applications. It delivers excellent fluidity for easy placement, high compressive strength, and long-term dimensional stability. Mapefill SP is commonly used for grouting baseplates, machinery, columns, and structural connections.

Key Points

• Super high-flow non-shrink grout
• Excellent fluidity for placement
• High compressive strength
• Long-term dimensional stability

Mapefill MC 06 is a micro-concrete / flowable repair grout designed for structural reinstatement and void filling in heavily congested or difficult-to-access areas. It provides excellent flow characteristics, high compressive strength, and reliable dimensional stability with minimal shrinkage. Mapefill MC 06 is suitable for large-volume repairs up to 250mm thick, column and beam restoration, and structural strengthening applications.

Key Points

• Flowable micro-concrete for structural repairs
• High compressive strength and low shrinkage
• Suitable for congested or difficult access areas
• Ideal for large-volume structural reinstatement

‍

PLANITOP SMOOTH & REPAIR R4, Structural R4-class, quick-setting, shrinkage compensated, thixotropic, fibre-reinforced,cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and skimming concrete Rapid repair of damaged concrete in beams, columns, infill walls, cornices, balcony edges, and other structural elements where a high-performance mortar is required.▪ Rapid smoothing of defects in cast concrete, such as deep honeycombing areas, spacer holes, and construction joints, before subsequent painting.▪ Repair and structural reinforcement of concrete by adding mortar.▪ Repair of precast concrete elements.▪ Repair of concrete damaged by oxidation of reinforcing bars due to carbonation.

Key Points

• High-strength structural repair mortar (R4 class)
• Excellent bond and low shrinkage
• High durability under mechanical stress
• Suitable for heavy-duty restoration works

T-60 is a high-strength, rapid repair mortar designed for structural concrete patching and reinstatement works. It provides excellent early strength gain, strong adhesion to existing concrete, and good durability in demanding repair environments. T-60 is suitable for vertical, overhead, and horizontal repairs where fast turnaround and long-term performance are required.

Key Points

• Rapid high-strength repair mortar
• Excellent early strength gain
• Strong adhesion to existing concrete
• Suitable for vertical, overhead, and horizontal repairs

A membrane-forming curing compound developed to retain moisture within freshly placed concrete. Once applied as an unbroken thin skin on the concrete surface, Membrane Cure restricts the passage of gauging liquid from the concrete. This helps minimise shrinkage cracking and improves overall curing performance and surface durability. Membrane Cure is suitable for slabs, pavements, and exposed concrete surfaces.

Key Points

• Forms moisture-retaining membrane
• Reduces shrinkage cracking
• Improves curing performance
• Suitable for slabs and pavements

‍

MODULO was designed with a structure that is resistant and distributes stress all over the surface so that it is treadable even before pouring, thus offering a good load-bearing capacity. MODULO makes natural or forced ventilation possible under the whole surface, allowing the dispersion of RADON GAS: a real air conditioning system.

MODULO is made of a blend of non-toxic, recycled plastic materials: it is highly resistant and it remains unaltered over time.


TECHNICAL ADVANTAGES OF USING MODULO:

• Stops moisture from the ground and allows ventilation of the foundation in all directions
• Treadable before pouring
• The design of the upper surface of MODULO allows a low concrete consumption
• The good ventilation of the foundation disperses RADON gas (when present) into the atmosphere
• Maintenance and modification of wiring and plumbing under the slab is made easy and inexpensive
• Inhibiting naturally occurring convection, it helps thermal insulation
• The air within the sub-slab void can be conditioned to increase its thermal efficiency (useful for greenhouses, industrial freezers, dessicators, and so on...)
• Possibiliy of collecting percolating liquids

THE COST ADVANTAGES OF MODULO:
‍

• Labour time reduced by 80%
• Can be layed onto partially prepared surfaces or waterproofing sheets
• Thanks to its light weight and the special blocking system it is easy and safe to use.
• Thanks to the GEOBLOCK and Fermagetto accessories it is possible to pour the foundation beams and the slab at the same time, drastically reducing the labour time dedicated to foundation forming
• Reduction of the volume of materials used, such as gravel and concrete
• It is possible to finish the surface of industrial-grade quarz floors immediately using blade type screed finishing tools

‍

Rockcote MultiStop Bedding Compound is a polymer modified thin section, cement based, skimming render which is considered non-sandable.

Based on Portland cement type HE conforming to NZS3122-1995.

Finely graded quartz sand, and manufactured fines are used as the main fillers.

Performance is enhanced through the addition of polymer and proprietry additives to improve, application, adhesion, and water repellent properties of the render.

Rockcote MultiStop is manufactured without the addition of hydrated lime, making it more compatible with acrylic based paints and applied finishes.

Multistop Finishing is a fine, polymer-modified cementitious Skim Coat designed for smoothing and fairing concrete surfaces prior to coating or sealing. It provides excellent workability, strong adhesion, and a high-quality surface finish with minimal shrinkage. Multistop Finishing is ideal for repairing surface imperfections, honeycombing, and achieving a uniform, paint-ready concrete surface.

Key Points

• Fine polymer-modified skim coat
• Smooths surface imperfections and defects
• Excellent adhesion and low shrinkage
• Creates paint-ready concrete finish

Neoferma Gasket

The Neoferma Gasket is a highly flexible sealing system designed for a wide range of construction joints. Its unique profile consists of hollow sections terminating in individual flexible lips, allowing the gasket to compress easily and maintain close, continuous contact with adjoining surfaces.

Suitable for use with concrete, steel, glass and timber, Neoferma provides an effective and durable seal while accommodating movement within the joint.

Key Features & Benefits

• Highly flexible design – Hollow sections and individual sealing lips allow the gasket to compress and conform closely to adjoining surfaces.
• Versatile application – Suitable for sealing joints between concrete, steel, glass, timber and other compatible building materials.
• Excellent weather resistance – Designed to maintain an effective seal under demanding external conditions.
• Proven water resistance – Successfully tested to a hydrostatic pressure equivalent to 10 metres of water head.
• High-rise performance – Tested for demanding wind conditions, including:
  • Buildings over 100 metres high with wind velocities up to 160 km/h, developing pressures of approximately 130 kg/m².
  • Buildings between 160–320 metres high with wind pressures of approximately 180 kg/m².
• Sound insulation – Provides excellent insulation against airborne sound.
• Thermal insulation – A single gasket provides good thermal insulation. For applications requiring higher thermal performance, a double-gasket system can be installed on the inside and outside of the joint.
• Durable synthetic rubber construction – Available in EPDM (Ethylene Propylene Diene Monomer), neoprene or similar synthetic rubber compounds.
• Wide operating temperature range – Suitable for temperatures from approximately –35°C to +90°C.
• Long service life – EPDM has an expected service life of approximately 25 years, while silicone rubber can provide a service life of approximately 50 years, depending on application and environmental conditions.
• Colour options available – Colours can be produced to meet architectural and design requirements, subject to minimum order quantities.

‍

Special mortars and grout systems for precision machines, wind turbines, anchor and injection work, repair systems for concrete, drinking water reservoirs, sewer and waste water systems, and industrial floors.

Polythene sheeting 250mu for vapour barrier, thinner sheets for concrete curing, and site protection applications.

4m x 50m, 2m x 50m

Black or Clear

‍

A flanking render for use over general masonry or concrete substrates. Tecstop Render is a highbuild, reinforced lightweight plaster for a fast build to create a flat, durable surface.

Typical Uses

• Flushing concrete block, brick, and concrete to provide a suitable surface for finishing plasters.
• Filling large voids up to 50mm deep
• Straightening walls up to 20mm in one coat application.
• Can be rasped easily once dry.

Tecstop Render will adhere well to clean, dry concrete and brick and will dry and cure well in a thin coat. Tecstop Render will provide good durability for an indefinite period depending on life of the substrate.

Technical data

• Operating Pressure variable to  6.9bar/100psi
  
• Operating Voltage                       230V
• Delivery Rate                               0.20L/Min variable
• Max Conveying Distance            100m
• Max Aggregate Size                    9.5mm
• Dimensions (LxWxH)                  100 x 89 x 89cm
• Weight                                          136kg

Advantages to the Quikspray® Carrousel® Pump

• Powerful constant torque variable speed 230V/50HZ/16A electric drive.
• Pumps  Grout, Plaster, and Micro-Concretes
• Clear reinforced material lines fitted with special flow through Q & Q couplings allow for reduced pumping pressures and increased pumping volumes.
• Mobility on rough job sites is aided by the use of 4.80/400-8” wheels & 16” pneumatic saw-tooth high flotation tires.
• Parabolic hopper allows for steady material flow and ease of cleaning with no corners to collect material.
• Simple foam ball (pipeline Pig) Machine and hose flushing technique ensures thouough removal ao all cement residue