Specially engineered to positively prevent bonding of the concrete to forms and form liners.

‍

Features & Benefits

• Improves release of formwork
• Protects formwork against rust
• Reduces cleaning of formwork
• Reduces concrete buildup on formwork and liners
• Leaves no residue, stain or discoloration
• Helps reduce dusting of concrete
• Available in 20 litre pails

‍

‍Uses‍

EZEE FormOil DF is effective on concrete construction moulds and formwork. EZEE FormOil DF is not suitable for tilt slab construction work.

‍

Coverage

Spray application of EZEE FormOil DF is recommended with coverage as follows:

• Steel, Plastic, Fiberglass: 50 m2 per litre
• Conditioned Aluminum: 50 m2 per litre
• HDO Plywood: 50 m2 per litre
• MDO Plywood: 35 m2 per litre
• Dimensional Timber: 25 m2 per litre
• BB Grade Plywood: 25 m2 per litre

‍

Application

Ready to use. Do not dilute. Form surfaces should be clean, free of dirt, rust, scale and concrete build up prior to application. EZEE FormOil DF should be spray applied using a misting spray tip so that application is in a thin uniform film to maximize product performance and economy. Over application will not produce better results and may cause dusting.

Excess material or puddles should be removed with a squeegee or absorbent rags.

When properly applied, EZEE FormOil DF will not leave any residue or stain on the concrete, producing a smooth, architectural concrete surface ready for subsequent coatings. Coating manufacturer’s recommendations for surface preparations must be followed.

Sprays easily in cold temperatures. Proper application substantially reduces concrete surfaces voids and extends the life of wood forms.