Sikadur Injecto Kit is a complete epoxy crack injection system designed for sealing and structurally repairing cracks in concrete and masonry. It includes a low-viscosity resin and injection components to ensure controlled delivery into fine or active cracks. The system restores structural continuity, prevents water ingress, and is suitable for both structural and non-structural crack repair applications.

Key Points

• Complete epoxy crack injection system
• Seals and structurally repairs cracks
• Prevents water ingress
• Suitable for structural and non-structural repairs

‍

Sikadur UA is a two-component, solvent-free epoxy resin repair mortar with a soft putty-like consistency for easy application by trowel, spatula or gloved hand. It is designed for general concrete patching, filling, bonding and reprofiling work, and can be used on dry, damp or submerged surfaces. Sikadur UA is suitable for repairing concrete floors, pipes, tanks, precast and insitu concrete components, as well as bonding concrete blocks, bricks, ceramics and steel where a strong, non-slump epoxy repair mortar is required.

Key Points

• Solvent-free, two-component epoxy repair mortar
• Non-sag / non-slump putty consistency
• Suitable for dry, damp and underwater applications
• Bonds well to concrete, steel, masonry and ceramics
• Ideal for patching, filling, reprofiling and small structural repairs

‍

Sika Grout 212 HP is a high-performance cementitious grout designed for structural void filling and anchoring applications. It provides excellent flow characteristics, high early and long-term strength, and a two-stage shrinkage-compensating system to support reliable dimensional stability. Sika Grout 212 HP is suitable for machine and column base plates, anchor bolts, bearing plates, structural gaps and general high-strength grouting applications.

Key Points

• High-performance cementitious grout
• High early and long-term strength
• Shrinkage-compensated for dimensional stability
• Excellent flow for base plates, anchors and void filling
• Suitable for structural grouting and precision applications

Sika 352N is a polymer-modified, cementitious repair mortar designed for Lightweight / HighBuild concrete repair and reprofiling applications. It provides excellent adhesion, improved flexibility compared to standard mortars, and strong resistance to weathering and mechanical stress. Sika 352N is suitable for structural repairs, vertical and overhead applications, and general concrete reinstatement work.

Key Points

• Polymer-modified repair mortar
• Suitable for lightweight/high-build applications
• Good flexibility and adhesion
• Suitable for vertical and overhead repairs

Sika 412 is a polymer-modified, cement-based repair mortar designed for concrete restoration and resurfacing applications. It provides good workability, strong adhesion to concrete substrates, and enhanced durability against weathering and wear. Sika 412 is suitable for general concrete repair, patching, and surface reprofiling in both interior and exterior environments.

Key Points

• Polymer-modified repair mortar
• Strong adhesion to concrete substrates
• Good workability and durability
• Suitable for interior and exterior repair

Monotop 438R is a polymer-modified, fibre-reinforced repair mortar designed for structural concrete repair and resurfacing. It offers high bond strength to existing concrete, excellent durability, and resistance to weathering and mechanical stress. Monotop 438R is suitable for vertical and overhead repairs, structural reinstatement, and refurbishment of deteriorated concrete elements.

Key Points

• Polymer-modified fibre-reinforced repair mortar
• High bond strength to existing concrete
• Durable under weathering and mechanical stress
• Suitable for vertical and overhead structural repairs

‍

Sika 910N is a cement-based bonding and corrosion protection slurry designed to promote strong adhesion between old and new concrete. It also provides protective properties to reinforcement steel when used as part of a repair system. Sika 910N is suitable for structural concrete repairs, reprofiling, and patching applications.

Key Points

• Cement-based bonding and corrosion protection slurry
• Promotes strong old-to-new concrete adhesion
• Protects reinforcement steel
• Suitable for structural repair systems

‍

Sika FC is a cementitious fairing coat designed to provide a smooth, pore-free finish to concrete surfaces prior to protective coatings or decorative finishes. It fills minor imperfections, blowholes, and surface irregularities while maintaining strong adhesion and durability. Sika Monotop FC is ideal for architectural concrete finishing and surface preparation works.

Key Points

• Cementitious fairing coat
• Fills blowholes and surface imperfections
• Produces smooth, uniform finish
• Ideal for coating preparation

‍

Rugasol C is a concrete surface retarder designed to delay surface setting for controlled wash-off and clean aggregate exposure. It helps produce a consistent textured finish while supporting strong bonding at construction joints. Ideal for precast, vertical, and on-site concrete applications where reliable surface retardation and finish control are required.

Key Points

• Delays surface set for controlled wash-off
• Produces consistent exposed aggregate texture
• Supports strong construction joint bonding
• Suitable for precast, vertical, and site applications

SILAC is an acrylic-modified silicone water repellent for porous exterior concrete, stone, masonry, blockwork, plaster, and brick surfaces. It penetrates into the surface to reduce water absorption while still allowing trapped moisture to evaporate out. SILAC is especially suited to highly porous materials such as Oamaru stone, concrete block, and weather-exposed masonry where rain penetration, dampness, moss growth, staining, or surface deterioration are a concern. A practical choice for protecting absorbent exterior surfaces without applying a heavy coating or changing the character of the substrate.

Key Points

• Acrylic-modified silicone water repellent
• Reduces water absorption in porous surfaces
• Maintains breathability of substrate
• Suitable for stone, masonry, concrete, and brick

Rockbond Slabcure(RB 7.10) is a sodium silicate based ready-to-use product that can be used to assist with curing freshly laid concrete whereby a top coat may be applied without any fear of debonding or delamination. This is because slabcure is not a curing membrane, therefore does not leave a permanent film over the concrete surface area.

SPECIAL PROPERTIES

• No need to mechanically remove before overcoating
• Ready to use.
• Easy to apply.
• Reacts chemically with calcium hydroxides in concrete to give a hard, dust free surface.

USES

• Concrete Floors
• Concrete Walls
• On most cementitious products

‍

Optimum Technical Performance:

• Lightweight, resilient and closed cell – the perfect expansion joint.
• Non-absorbent with a high level of chemical resistance.
• Reliable and durable performance.
• Excellent weather-ability.
• Independant testing data available

‍Health, Safety and the Environment:

• Green Star compliant (VOC), Zero Global Warming Potential (GWP), Made without Ozone destroying agents such as CFCs or HCFCs.
• Manufactured under a certified ISO 14001 Environmental Management system.

Quick and Easy To Use:

• Cost savings in material, time and the overall project.

Swellstop is a hydrophilic waterstop. When It is encapsulated in a concrete cold-joint where it is designed to expand on contact with water, forming a tight seal and preventing water passage. It provides long-term protection against leaks in construction joints, pipe penetrations, and below-ground structures. Swellstop is ideal for basements, tunnels, and water-retaining concrete applications where movement or water pressure is expected.

Key Points

• Hydrophilic waterstop that expands on contact with water
• Seals construction joints and penetrations
• Provides long-term leak protection
• Suitable for below-ground and water-retaining structures

TopCure is a reusable concrete curing blanket used to protect fresh concrete and control moisture loss during curing.Placed over the slab after finishing, it helps create a stable curing environment while shielding the surface from sun, wind, rain, and site contamination. TopCure is designed for 7-day wet curing, lays flat, cuts easily, and features an anti-slip surface for safer site use.A practical choice for slabs, pavements, hardstands, and civil concrete where consistent curing and surface protection are required.

Key Points

• Reusable curing blanket system
• Controls moisture loss during curing
• Protects from weather and contamination
• Anti-slip surface for safer site use

‍

Temporarily protect concrete slabs from latent damage during construction and remediation projects with Transguard® concrete slab floor protection sheets. Damage to newly poured concrete or decorative colored floors caused by light construction traffic can be costly. Therefore, the ability of Transguard® to protect against light impact and liquid spills ensures concrete floors are safeguarded at a reasonable price.  

Transguard® 2000 is a disposable, lighter weight material ideal for surfaces that will not experience an abundant amount of foot traffic. A roll of Transguard® 2000 measures 8’ x 200’ and weighs approximately 54 lbs.

ADVANTAGES

• Easily handled
• High tear resistance
• Reusable
• Weather proof
• Allows for light traffic

BENEFITS

• Floor scratches and dings are minimized
• Prevents scratches when moving equipment and furniture
• Will not affect the appearance of the concrete

PRODUCT PROPERTIES

• Natural colored polypropylene
• Non-woven fabric will not mildew
• White polyethylene coating applied to one side

PHYSICAL PROPERTIES

• Standard Weight = 42 lbs/1000 ft2 (20.5 kg/100m2)
• Thickness = 50 mils (1.3 mm)
• Puncture Strength = 65 lbf (289 N)

‍

• UCC Petrolatum Tape is composed of a non-woven synthetic fabric carrier fully impregnated with a neutral petrolatum compound.
• Stabilised with inert fillers and complemented with corrosion inhibitors for enhanced protection.
• Designed to provide long-term corrosion protection to pipes, flanges, valves, and other fittings.
• Forms a protective barrier against moisture and corrosive elements, helping to extend the service life of protected components.
• Suitable for a wide range of industrial corrosion protection applications.
• Available sizes: 50mm × 10m, 75mm × 10m, 100mm × 10m, and 150mm × 10m

‍

The ULMA BMK Climbing Formwork is a highly configurable system with integrated access platforms enabling beneficial time efficiencies in concrete building construction climbing.

The system is configurable, versatile, robust and dismountable. It is composed of MK system components, standard-length MK walers and specific BMK accessories.

‍

Advantages:
‍

• High flexibility guaranteed with few components.
  ‍
• Completely adaptable for vertical, inclined and circular walls.
  ‍
• Fully dismountable due to its independent walers joined with bolts.
  ‍
• Minimum transport volume.

‍

ULMA Formwork is a high-performance engineered formwork system designed for large-scale concrete construction applications. It offers strong load-bearing capacity, fast assembly, and high safety standards for complex structural works. ULMA systems are widely used in infrastructure, commercial buildings, and heavy civil projects requiring efficient and repeatable formwork solutions.

Key Points

• High-performance engineered formwork system
• Strong load-bearing capacity
• Fast assembly and high safety standards
• Suitable for large-scale infrastructure projects

‍

The ULMA ORMA Panel Formwork is perfect for the construction of all kinds of vertical concrete structures, both in building construction and civil works (walls, columns, abutments, footings).

It's distinctive for high performance rates with minimum labour costs and erection time.

The system is comprised mainly of panels which, joined by clamps, make up formwork gangs. It has items that provide efficient and safe solution for all types of geometries.

‍

Advantages:

• Designed to withstand high concrete pressures.
  ‍
• Wide height range of panels: 3.3 m; 2.7 m, 1.2 m and up to 3.3 x 2.4 m (7.92 m2).
  ‍
• Very versatile: lateral holes for fast erection of standard solutions (bulkheads, corners, columns, etc.). Minimum work on infillings and compensations.
  ‍
• Panel connection with clamps and a single hammer blow.
  ‍
• Three basic functions: 1. Join, 2. Align, 3. Stiffen. Adjustment of clamp enables compensations of up to 10 cm.
  ‍
• Robust panel with galvanised steel frame and reinforced corners.
  ‍
• Connecting element between panels and corners.
  ‍
• Robust panel with steel frame and reinforced corners.
  ‍
• Excellent finishing due to high-quality phenolic birch plywood.
  ‍
• Wide height range of panels: 3.3 m; 2.7 m, 1.2 m and up to 3.3 x 2.4 m (7.92 m2).
  ‍
• Safety items: SBU Safety Platform. Galvanised metal platform with accesses designed for wall formwork work at height (bracing, concrete pouring, etc.) with absolute safety.

The ULMA KSP System works in conjunction with the BMK Climbing System and provides formwork support on the interior sides of concrete building construction.

The KSP is a platform for the support of formwork and is used for internal building faces, elevator and staircase shafts, hollow piers or other types of cavities where formwork support is necessary. It is usually combined with conventional climbing formwork systems on the outside faces of the wall.

‍

Advantages:

• Covers any distance with completely standard and modular material, mainly walers and timber beams.
  ‍
• Versatile gravity pawl bracket adaptable to all waler types and different lengths.
  ‍
• Easy adjustment of all kinds of formwork.
  ‍
• Two solutions depending on anchor type.
  ‍
• Gravity pawl bracket with GP box-out: used in civil engineering construction projects, in solutions for hollow piers and gaps between walls. The bracket rests on the bottom side of the cavity made while pouring the previous stage.
  ‍
• Folding bracket with adjustable bracket: commonly used in building construction, especially for fair-faced concrete walls. No holes are required in the wall. The adjustable bracket rests on the folding bracket, fixed to the wall with DW15 cone.

‍