Technical data

• Operating Pressure variable to  7Bar/100psi
  
• Operating Voltage  V/Hz/A         Manual
• Delivery Rate                               7/Min variable
• Max Conveying Distance            NA
• Max Aggregate Size                    2mm
• Dimensions (LxWxH)                  40x 60x 66cm
• Weight                                         24kg

Key Points

• Lightweight hand-operated grout pump
• Vertical Pumping Action
• Designed for small-scale and precision grouting
• No power source required
• Suitable for void filling, anchoring, and slab lifting

• Compact waste skip for construction sites
• Accessible from multiple sides for loading
• Suitable for tight or multi-level sites
• Helps keep work areas clean and organised

‍

The All Doors Waste Skip is a compact site waste skip designed for collecting, sorting, and removing waste from building and refurbishment projects.
It is particularly useful on tight sites and multi-level projects where waste needs to be gathered close to the work area before being moved for disposal. The Skip is narrow enough to fit through all doorways, while wheel and bale-arm options help crews move and lift the skip depending on site setup.
As a tidy, purpose-built waste handling unit, it helps keep work zones cleaner, reduces scattered debris, and gives contractors a more organised way to manage construction waste on active sites.

‍

Capacity: 500lt.

AQUELLA.

A white cement based waterproof coating capable of waterproofing concrete and masonry substrates from both sides.

• Quick drying
• Minutly expands on drying keying to the substrate
• Withstands 80m head positive and 40m head on the reverse side of concrete
• Internationally renown and Proven over 80 years
• Non Hazardous and easily applied

Key Points

• Clear siloxane water repellent for mineral surfaces
• Easily applied to vertical and inclined surfaces
• Penetrates to a depth between 2-5mm
• Reduces water absorption without changing appearance
• Allows substrate to breathe (vapour permeable)
• Helps protect against efflorescence, staining, and weathering

BARREL GUN 370mm

MasterEmaco N 5000AP active primer, not only reinstates a high pH environment it also contains active corrosion inhibiting additives for the protection of reinforcement steel. It can also be used as an adhesive bonding slurry for subsequent repair mortars. When mixed with water, it forms a slurry that can be applied by brush to the clean exposed reinforcement, or directly on the dampened, prepared concrete substrate when used as a bonding coat.

Typical Uses
MasterEmaco N 5000AP is used for the protection of reinforcement steel:

• When steel is visible and the available depth of cover is less than 10 mm.
• When concrete is contaminated with chlorides
• In critical environments when extra protection is specified.
• When the timing at the jobsite does not allow for the repair mortars to be applied immediately after cleaning the steel.

Features & Benefits
MasterEmaco N 5000AP can also be used to aid bond and application properties of hand applied repair mortars in extreme thicknesses and conditions.

• Meets all major international norms - for steel priming in concrete repair systems.
• Excellent rust inhibiting properties - as it reinstates a high pH environment.
• Contains active corrosion inhibitors - to further protect the steel.
• Polymer modified - for additional adhesive bond to the steel.
• Long life repairs - does not reduce adhesion of repair mortars to steel
• Wide compatibility - with steel reinforcing bars and concrete or repair mortars.
• Fast curing - to save time and money.
• Simply mixing – just add water.
• Multi-use - can also be used as a bonding slurry to improve bond and application thicknesses of MasterEmaco repair mortars on prepared concrete surfaces.
• Orange - for easy site control of reinforcement coverage

‍

MasterEmaco N 5200CI is a universal, single component, polymer modified, fast setting, repair, re-profiling and levelling mortar containing active corrosion inhibition.

MasterEmaco N 5200CI contains special cements, graded sands, selected polymers and fibres to reduce shrinkage and improve physical and application properties. When mixed with water, it forms a mortar with an exceptionally wide range of applications. MasterEmaco N 5200CI can easily be hand or trowel applied in thicknesses from 3mm to 100mm.

Uses

• MasterEmaco N 5200CI is used for the non-structural repair of concrete elements like balconies edges, building facades, parapet walls, precast panels, beam edges and stair nosing’s.
• MasterEmaco N 5200CI can be applied as a smoothing or levelling coat at 3mm thickness on large vertical and overhead areas to achieve a more aesthetic finish e.g. prior to painting.
• MasterEmaco N 5200CI can be applied in environments where active corrosion inhibition is necessary.

Advantages

• Shrinkage compensation systems and fibre reinforcement - minimise crack tendency.
• Smooth, creamy, non-slump mortar - easy to create profiles and corners without formwork.
• Excellent high build capacity - can be applied 80 - 100 mm in vertical applications or 70 – 80mm overhead in one layer.
• Multi-use - fairing coat and patch repair mortar in one with active corrosion inhibition.
• Fast setting - can be over-coated in only 4 hours.
• Good strength development - exceeding requirement of Class R2 of EN1504 part 3.
• Low modulus of elasticity - copes with thermal movement of structures.
• Low chromate (Cr[VI] ‹ 2 ppm ) - low risk of skin irritation.
• Chloride-free - does not add to chloride load of structure.

‍

MasterFlow 810 is a ready to use, non-shrink, natural aggregate cementitious precision grout for use in general civil engineering works. MasterFlow 810 provides extended working life and high early and ultimate strengths.

Applications

All precision, non-shrink grouting applications with clearances of 10mm or more including:

• Critical equipment baseplates, soleplates and columns.
• Precast wall panels, beams, columns, structural building members and curtain walls.
• Patching poured in place concrete structures eg. honeycombing, using preplaced aggregate techniques.
• Underpinning.
• Anchoring dowels, bolts and other fixings.
• Applications requiring high early compressive strengths and high ultimate compressive strengths.

Features

• High strength - Provides good early and ultimate strengths which ensure quick return to service and long term durability
• Non shrink - Hardens free of bleeding, settlement and drying shrinkage when placed at flowable consistency
• Flowable consistency -Ensures complete filling of even intricate voids often without the need for pumping and strapping
• Ample working time -Remains placeable up to 1 hour, even at high ambient temperatures
• Dense, impermeable grout - Provides a good watertight seal
• Economical - Greater volumes of grout can be mixed and handled with less labour.
• Easy to use - Requires no special mixing equipment, it can be mixed in a standard concrete mixer or in a pail using a grout stirrer.
• No added chloride - Does not add to chloride load on structure
• Strict quality control - Ensures reliable and consistent product performance.
• Provides complete non shrink performance - when tested in accordance with simulated Bedplate Technique.
• Compliance with codes - Meets the non-shrink requirements of ASTM C1090 and CRD-C 621, Corps of Engineers Specification for Non Shrink Grout; tested to the requirements of AS1478.2 "Methods of sampling and testing admixtures for concrete, mortar and grout".

‍

Betonomit is a non-explosive demolition agent designed for controlled cracking of concrete, rock, and masonry. Once mixed and poured into pre-drilled holes, it expands to break material safely and quietly without blasting or vibration. Ideal for demolition, excavation, and confined sites where precision, low noise, and reduced disruption are important.

Key Points

• Non-explosive concretedemolition agent
• Controlled cracking withoutvibration or noise
• Safe for confined andsensitive sites
• Suitable for rock and masonrybreaking

Bio Form is effective on all types of formwork including steam curing and heated forms.

Flashpoint over 100º meaning very little storage considerations on site

High coverage rate Up to 40m² p/lt.

Key Points

• Simple to use
• Free of sulphur and aromatics
• Will not stain or discolour concrete when correctly applied
• Suitable for precast and site applications

Bio R is a release agent designed for clean, consistent formwork release with a lower environmental impact.
It helps minimise staining, blemishes, and clean-up time while offering a more environmentally conscious alternative to conventional release oils. Bio R suits precast and in-situ concrete applications where dependable release is still required, but environmental positioning also matters.

Key Points

• Lower environmental impact formulation
• Reliable and consistent formwork release
• Helps minimise staining and blemishes
• Reduces clean-up time on site

Key Points

• Fast-cure styrene-free injection adhesive
• Suitable for concrete, brick, and blockwork
• Works in wet and water-filled holes
• ETA assessed for structural fixing applications

BIS-P PolyPRO Gen2 is a fast-cure, styrene-free injection adhesive for anchoring threaded rod and rebar into concrete, hollow brick, and blockwork.

It is designed for practical site anchoring where speed, reliability, and ease of use matter. BIS-P PolyPRO Gen2 is suitable for starter bars, threaded studs, masonry fixings, handrails, brackets, services supports, and general construction fastening.

With a fast gel and cure time, it helps contractors complete fixings without long delays. It is also suitable for use in wet and water-flooded holes, making it a useful option for real site conditions where holes are not always perfectly dry.

ICCONS lists BIS-P PolyPRO Gen2 as styrene-free, marine grade, ETA assessed for cracked and non-cracked concrete, with C1 and C2 seismic performance ratings.

A strong everyday adhesive anchor for medium-load fixing where contractors need a fast, clean, cartridge-applied system that works across concrete and masonry.

‍

Bostik SafeSeal is a solvent free versatile 1-part low modulus silyl modified polymer (SMP) sealant for multipurpose applications in the construction and general building industry.

• Highly Elastic
• Green Star Compliant
• BRANZ Appraised
• Adheres to most common building substances
• One Component, fully paintable
• Available in Cartridge and 600 ml Sausage

Key Points

• Aliphatic polyurea concrete repair system
• Suitable for cracks, spalls, voids, and joints
• Self-levelling and non-shrink performance
• Can be polished to blend with concrete finish

Camo Patch UV is a high-performance Aliphatic Polyurea ideal for repairing architecturally designed polished concrete and decorative floors.

This UV-tested, two-component system excels in concrete repair, filling cracks, voids, floor joints, spalls, bolt-holes, feather edges, and grout coat to fill pinholes.

Its self-leveling, self-priming nature, excellent adhesion, and non-shrink make it a top choice. Additionally, with the integration of pigments and dry aggregates like SSP Patch Crete systems, the cured patch can be polished to blend with the substrate seamlessly.

‍

CARTRIDGE TRADE GUNS

Keypoints

• SBR Latex Based primer/admixture
• Improves adhesion of toppings to existing concrete
• Interior/Exterior
• Suitable for mortars, screeds, and patch repairs
• Can be used as an admixture to enhance mortar properties

Multibond is a general-purpose bonding agent designed to improve adhesion between new cementitious materials and existing concrete substrates.

It enhances bond strength, reduces the risk of delamination, and improves the durability of repair and resurfacing applications.

Multibond is commonly used for patch repairs, screeds, and mortar overlays.

‍

Key Points

• Fast-setting repair mortar 2-100mm
• Suitable for vertical and horizontal repairs
• High early strength development
• Minimises downtime on site

Quickpatch is a fast-setting repair mortar designed for rapid patching of damaged concrete in both horizontal and vertical applications.

It offers strong early strength development, good bond to existing concrete, and reduced downtime on site.

Quickpatch is suitable for small to medium concrete repairs where speed and durability are essential.

‍

Cemkey is a liquid bonding agent and primer used to improve adhesion between existing cementitious substrates and new cement-based materials such as screeds, renders, repair mortars, levellers and tile adhesives. It can be applied as a tacky primer or used as an additive in cement mixes to help improve durability and reduce surface dusting. Suitable for interior repair, resurfacing, screeding and rendering applications where improved bond to a sound substrate is required.

Key Points

• Liquid bonding agent / primer for cementitious substrates
• Improves bond between existing substrates and new screeds, renders, repair mortars, tile adhesives and levellers
• Can also be used as an additive in cement-based mixes
• Helps reduce surface dusting when used in cement screeds or renders
• Suitable for interior repair, patching, rendering, screeding and priming applications

Cemscreed 40 is a high-performance cementitious floor screed designed for levelling and resurfacing concrete substrates at thicknesses typically up to 40mm. It provides a smooth, durable, and dimensionally stable surface suitable for receiving floor coverings or further finishing systems. Cemscreed 40 offers good workability, strong bond strength, and is ideal for commercial and industrial flooring preparation where a high-quality level finish is required.

Key Points

• Cementitious floor screed up to 40mm
• Smooth and dimensionally stable finish
• Strong bond strength and durability
• Suitable for commercial and industrial flooring

Technical data

• Operating Pressure variable to  14 bar/psi
  
• Operating Voltage  V/Hz/A          Manual
• Delivery Rate                               8-12L/Min variable
• Max Conveying Distance            NA
• Max Aggregate Size                    2mm
• Dimensions (LxWxH)                  118 x 28x 80cm
• Weight                                         24kg

Key Points

• Portable skid-mounted piston grout pump
• Continuous flow positive displacement system
• Suitable for civil and industrial applications
• Ideal for void filling, slab lifting, and machine bases

The ChemGrout CG-570 Thick Mix grout pump includes both skid and trailer mounted grout plants. This machine will continuously mix and pump the widest range of grouting materials from thin to thick consistencies. Materials that are used with this unit include Repair Mortars, Gel Mortars, Stucco, Fireproofing Plastering, EIFS, cement/masonry sand, cement/fly ash, flowable and non-flowable grouts and Bentonite waterproofing grouts.

The optional air compressor allows the operator to continuously mix, pump and spray. The 170L mixing tank is equipped with baffles, bag breakers and variable speed high-efficiency paddles that provide rapid mixing. The tank outlet valves are large slide gates that allow the thickest materials to fall easily into the pump hopper. The holding hopper has an auger in it to keep the material thoroughly mixed while constantly supplying the grout pump with material for the continuous pumping operation.

The grout pump is a Size 6, 3 stage, variable speed, positive displacement, progressive cavity, rotor-stator pump that delivers up to 30 LPM, 580 PSI. These units can be powered by compressed air or their own hydraulic power systems that feature 15 HP Electric motor, 20 HP Gasoline engine or 20 HP Diesel engine, both equipped with electric start. The rugged steel frame stands up to the toughest conditions on the job site.

Operator controls are centrally located for efficient production. All components are easily accessible for operating, cleaning, and maintenance. The highway ready trailer comes complete with leaf springs, lights, a working platform and an adjustable trailer hitch for either ball or pintle.

‍

Applications

Anchoring rock bolts, repair mortar spraying, undersealing, slab raising, underlayments, spraying bonded overlays, bridge rehab, dowel bars, and manhole sealing.

‍

Specifications

• Model: CG-570
• Type: 3 Stage, Size 6, Open Throat
• Mixing Tank: 170 litre
• Holding Hopper: 56 litre
• Maximum Output: 8 to 30 litres
• Maximum Pressure: 580 PSI

The ChemGrout CG-580 grout pump is a high production volume, high pressure skid mounted grout plant. This versatile unit is designed to mix and pump neat cement, bentonites, lightly sanded grouts and most commercial pre-blended non-shrink grout mixes.

This unit features two 480L mixing tanks, a 189L holding hopper and the double acting high pressure plunger grout pump. The unique double mix tank design permits continuous pumping as each mix tank alternates feeding the pump. Each mixer is equipped with baffles, bag breakers and variable speed high-efficiency paddles that provide rapid mixing. The tank outlet valves are large slide gates that allow the thickest materials to fall easily into the pump hopper. The holding hopper supplies the grout pump with material for the continuous pumping operation.

The grout pump is a 3.5X8 double acting plunger pump. The plunger pump is also designed for simple conversion between several pressure outputs by purchasing plunger group conversion kits. The pump has patented fasteners that dramatically reduce disassembly time for cleaning and maintenance.

The rugged steel frame includes the workers platform and stands up to the toughest conditions on the job site. Operator controls are centrally located for efficient production. All components are easily accessible for operating, cleaning, and maintenance.

‍

Applications

Mining, tunnels, dams, soil compaction, rock grouting, water cut-off, voidfilling, soil anchors, contact grouting, marine/underwater, precast, slab undersealing, and slabjacking.

‍

Specifications

• Pump Size: 90mm x 200mm
• Maximum Output: 120 litres per minute
• Maximum Pressure: 1,200 PSI (80 BAR)

• Sealant compatible
• Non absorbent 6mm-60mm diameter
• Forms the oval shape for correct joint design.
• Can be used to set depth for a variety of products and finishes
• Sizes 10,15,20,25,30,40,50mm x 50m Rolls

.

The FG 300 is versatile, water-dilutable and easy to use and offers highest safety due to its good penetration capacity.

‍

• For adhesion prior to the application of codex thin-bed mortars and levelling compounds
• On calcium sulphate and cementitious screeds, concrete
• On heated substrates
• On precast concrete elements
• On gypsum, lime cement and cement plaster
• On gypsum carton and gypsum fibre boards
• On concrete and porous concrete
• On masonry
• For residential, commercial and industrial areas
• For wall and floor coverings in interior and exterior areas

‍

A fine self-levelling compound designed for smoothing and levelling interior concrete floors up to 20mm thick. It provides a smooth, even surface ready for floor coverings and finishing systems. FM20 is suitable for fast and efficient floor preparation in commercial and residential applications.

Key Points

• Self-levelling interior floor compound
• Smooths floors up to 20mm thickness
• Creates even surface for floor coverings
• Fast and efficient floor preparation
• Suitable for commercial and industrial application , with normal wear
• Can be used with hot water underfloor heating

‍