Everitts - Right 2 Site
Home
Phone Everitts now Phone
Email E-mail
Menu
 
GEOPLAST Concrete Formwork ULMA Construction Formwork Collomix Mixers/Blenders Grouts & Grout Pumps Concrete Skips & Handling Equipment MODULO Formwork for Ventilated Foundations Form Release Concrete Remover Concrete Curing Compounds Concrete Surface Finishes Concrete Repair Concrete Sealants Waterstops / Waterproofers Flooring & Paving Systems Air Filtration & Dust Control Tapes Epoxies Abrasives Concrete Accessories
 
Home | Concrete Surface Finishes ...

SURFACE RETARDER



ROCKBOND SURFACE RETARDER-PLUS (RB 7.17) is a concrete surface retarder and recommended to be used on concrete with strengths of 20 MPa and over, and on concrete under 20MPa in hot weather. When applied to the surface of freshly poured concrete it delays the normal hydration of cement for a depth of 3-6mm (and occasionally deeper), whilst the underlaying concrete hardens normally.

USES
  • Used in the construction of decorative exposed aggregate driveways, paths etc.
  • To produce a uniform depth exposed aggregate finishes to in-situ and precast concrete.
  • Provides an economical surface preparation to concrete that be overlaid with a plaster screed.
  • It is also used to form a mechanical key at construction joints, eliminating the need for expensive and damaging scabbing.

PDF documents require the Adobe Viewer to be installed.
If you are experiencing problems viewing or downloading the PDFs, please click the icon on the right to ensure you have the latest Adobe Reader installed ... or email us, specifying the documents you require and we will send them to you by return email.