BIO-FORM is a diesel-free concrete release agent which reacts with the alkaline products of setting cement to form insoluble soaps. These soaps prevent any bond developing between the concrete and formwork and ensure a clean, even, blemish free surface with minimum voids.

BIO-FORM has been formulated to provide users with a diesel-free, non-waterbased release agent providing the same release properties as DISCRETE and FRE-FORM.

BIO-FORM does not affect the natural bonding characteristics of paint, plaster, and other cementitious coatings. On surfaces not subjected to weathering, (e.g. interior) wash the surface with water containing a little detergent, or brush down thoroughly.

ADVANTAGES & BENEFITS

User and Environment

BIO-FORM is simple to use and free of sulphur and aromatics.
BIO-FORM is non-toxic, however standard handling precautions should be followed (see MSDS).
BIO-FORM contains no petroleum based diesel and is therefore safer to handle and use on a daily basis than other release agents.
BIO-FORM is almost odourless, meaning less complaints regarding clothing contamination and reduced odour when sprayed.
BIO-FORM is essentially non-irritating to skin. Users are unlikely to develop rashes when in contact with BIO-FORM.
BIO-FORM flash point is over 90oC and is therefore not restricted for transport or storage.

Concrete Release

Produces a clean white release with a minimum of voids.
May be used with steam curing or heated forms.
Maintains the surface of steel moulds ? no build-up of residue.
BIO-FORM does not affect the natural bonding characteristics of paint, plaster and other cementitious coatings.
Increases the life of wooden forms and prevents rust on steel forms.
Will not stain or discolour concrete.
Ready to use as supplied.
Is not waterbased, and will therefore not wash off forms when exposed to showers or light rain.

download a SPEC SHEET

e-mail us about this product

The Spec Sheet PDF documents require the Adobe Viewer to be installed.
If you are experiencing problems viewing or downloading the PDFs, please click the icon on the right to ensure you have the latest Adobe Reader installed ... or email us, specifying the documents you require and we will send them to you by return email.