Universal, fast-setting, polymer modified, fibre reinforced, light weight repair and levelling mortar.

Emaco Nanocrete R2 is a universal, single component, polymer modified, fast setting, repair, re-profiling and levelling mortar. Emaco Nanocrete R2 is a ready-to-use material that contains special cements, well graded sands, carefully selected polymers and fibres to reduce shrinkage and improve physical and application properties. When mixed with water, it forms a mortar with an exceptional wide range of applications. Emaco Nanocrete R2 can easily be hand or trowel applied in thicknesses from 3 up to 100 mm.

Emaco Nanocrete R2 is used for the non-structural repair of concrete elements like balconies edges, building facades, parapet walls, precast panels, beam edges and stair nosings. Emaco Nanocrete R2 is ideal for general, nonstructural patch repairs where fast setting properties with short over-coating times are needed. It exhibits excellent high build properties allowing up to 100 mm thickness in one layer. Can be overcoated after only 4 hours @ 20°C Emaco Nanocrete R2 can be applied as a smoothing or levelling coat at only 3 mm thick on large vertical and overhead areas to achieve a more aesthetic finish e.g. prior to painting. Emaco Nanocrete R2 can be applied inside and outside, on horizontal, vertical and overhead surfaces, in dry and wet environments.

FEATURES AND BENEFITS

Formulated with shrinkage compensation systems and fibre reinforcement to minimise crack tendency by controlling the Nanostructures in the matrix
Smooth, creamy, non-slump mortar - Superb application properties and feel on the trowel; easy to create profiles and corners without formwork
Excellent high build capacity - can be applied 80 - 100 mm in horizontal or vertical applications in one layer, or even 70 – 80 mm overhead
Minimum layer thickness of 3 mm so can be used as large area fairing coat
Multi-use- fairing coat and patch repair mortar in one
Fast setting - can be over-coated in only 4 hours
Good strength development exceeding requirement of Class R2 of EN1504 part 3
Low modulus of elasticity
Low chromate (Cr[VI] < 2 ppm )
Chloride-free.

download a SPEC SHEET

e-mail us about this product

The Spec Sheet PDF documents require the Adobe Viewer to be installed.
If you are experiencing problems viewing or downloading the PDFs, please click the icon on the right to ensure you have the latest Adobe Reader installed ... or email us, specifying the documents you require and we will send them to you by return email.